Use the / button to select [DAY/NIGHT], use the / button to choose “COLOR”, and press
the SET button.
The D/N SETTING-COLOR screen appears.
Use the / button to set [EXT ALARM] to “OFF”.
Use the / button to select [DAY/NIGHT], use the / button to choose “COLOR”, and press
the SET button.
The D/N SETTING-COLOR screen appears.
Use the / button to choose the external alarm input channel setting for [EXT ALARM].
You can use external alarm input to switch the video mode of the camera.
Available settings:
On the ALARM screen, use the / button to set [ALARM IN] to “1” or “2” (alarm input channel
set on the D/N SETTING-COLOR screen), and use the / button to select [POLARITY].
For details, see “Setting the Alarm Input (ALARM IN)”.
[POLARITY] = “NO”
Open: color mode, Closed: black/white mode
[POLARITY] = “NC”
Open: black/white mode, Closed: color mode
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
2
1
2
OFF: Disables detection of external alarm input.
1: Switches to color or black/white mode when an external alarm input through the ALARM IN 1 terminal is
detected.
2: Switches to color or black/white mode when an external alarm input through the ALARM IN 2 terminal is
detected.
3
4
40 / 100
To Next Page
Loading...
