Sanyo VCC-XZ600P - Setting the Focusing Mode (FOCUS)

AUTO: Auto focus
MANU: Manual focus
Set the focusing distance and speed appropriate for the target object.
Use the / button to select [LENS] in the main menu, and press the SET button.
The LENS screen appears.
Use the / button to select [FOCUS], use the / button to select “AUTO”, and press the
SET button.
The FOCUS SETTING screen appears.
Use the / button to select [LIMIT NEAR], and use the / button to choose the nearest
focusing distance to the object.
Available settings: 10cm, 30cm, 50cm, 1m, 3m, 5m
Use the / button to select [SENSITIVITY], and use the / button to select sensitivity in
focusing.
Available settings:
1
2
3
When the distance to the object is less than or equal to 1m, focusing may become difficult.
4
HIGH: High sensitivity focusing
LOW: Low sensitivity focusing
When focusing sensitivity is set to “HIGH”, the camera may react to even slight movements of the
object. In this case, change the setting to “LOW”.
43 / 100