You can select zooming speed to the object and magnification power of electronic zoom.
Use the / button to select [ZOOM], and press the SET button.
The ZOOM SETTING screen appears.
Use the / button to select [SPEED], and use the / button to choose the desired optical
zoom speed.
Available settings: 1, 2, 3, and 4 (maximum)
Use the / button to select [EL ZOOM], and use the / button to choose the desired
magnification power of electronic zoom.
The optical zoom factor can be selected from the range of 1 to 30. If you want to zoom in beyond this range, use
the electronic zoom function by selecting from the following electronic zoom factors:
Available settings:
Use the / button to select [V-RESO.UP], and use the / button to enable/disable the
vertical resolution increase.
Available settings:
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
2
3
OFF: Optical zoom only
x 2: Approx. 60x magnification
x 4: Approx.120x magnification
x 8: Approx.240x magnification
x 16: Approx.480x magnification
When the electronic zoom is applied, the quality of image slightly degrades.
4
ON: Increases vertical resolution while using the electronic zoom.
OFF: Does not increase vertical resolution while using the electronic zoom.
The vertical resolution increase (V-RESO.UP) cannot be set to “OFF” in the following conditions:
When the electronic sensitivity setting (SENSE UP) is set to “ON”.
When the [SHUTTER] setting is set to “LONG” (Slow shutter speed).
When [DNR] is set to “ON”.
5
46 / 100
To Next Page
Loading...
