Use the / button to select [ALARM DISPLAY], and use the / button to choose “ON”.
The [TIME] menu item appears.
Available settings:
Use the / button to select [TIME], and use the / button to choose the duration for which
the camera title blinks.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M, 3M, 4M, 5M (S: seconds, M: minutes)
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
OFF: The alarm information does not blink.
ON: When an alarm is detected, the camera title displayed in the screen blinks indicating that the alarm is
detected.
While [ALARM DISPLAY] is set to “ON”, the camera title will flash even when [TITLE] in [DISPLAY] is
set to “OFF”.
If the camera title is not set, “????????” blinks.
2
3
54 / 100
To Next Page
Loading...
