According to your installation environment or connecting condition, the OPTION menu can be used to perform
the following settings.
DISPLAY:
Sets the information to be displayed (camera title, magnification power in zooming, etc.) and their position
in the monitor.
MIRROR:
Sets a mirroring mode according to your installation condition of the camera. This setting is useful, for
example, when the camera is installed upside down or when performing surveillance through a mirror.
STABILIZER:
Corrects images from a shaking camera installed on the roadside or a similar place.
SYSTEM:
Sets the preferences when the external system device is connected to control the camera remotely.
65 / 100
To Next Page
Loading...
