When the target object is located near the camera, adjust the nearest focusing distance to the object in
[LIMIT NEAR] on the FOCUS SETTING screen.
If it is difficult to adjust the focus using the auto-focus function, use the manual focus function.
Adjust the iris level or the aperture opening value. (CAMERA
→
IRIS)
Select “MIDDLE” or “HIGH” for the [MAX GAIN] setting under the AGC option. (CAMERA
→
AGC)
Set the electronic shutter setting to slow shutter speed (LONG). (CAMERA
→
SHUTTER)
Increase the level of electronic sensitivity (SENSE UP). (CAMERA
→
IRIS)
Adjust the iris level or the aperture opening value. (CAMERA
→
IRIS)
When noise occurs in the image because the object is dark, enable the digital noise reduction (DNR).
(CAMERA
→
AGC)
Use the backlight compensation function.
79 / 100
To Next Page
Loading...
