When the menu screen is not displayed, the operation buttons can be used to perform the following operations:
Focus adjustment
Use the button to set the focus to a near target.
Use the button to set the focus to a far target.
Zoom adjustment (Magnification: ×1 to ×30)
Use the button to zoom out of the target.
Use the button to zoom into the target.
One-push auto focus adjustment
Use the SET button to focus the camera automatically by one-push operation.
Connecting the optional camera control unit enables you to remotely set the camera's operating conditions on
the menu screen.
For details, refer to the instruction manual supplied with the camera control unit.
1
2
3
Be sure to disconnect the camera control unit after you complete setting up the camera.
Avoid connecting the camera control unit via a cable compensator or video distribution amplifier.
Doing so may prevent remote control of your camera.
8 / 100
To Next Page
Loading...
Need help?
General
