EasyManua.ls Logo

Sanyo VCC-XZ600P - Page 85

Sanyo VCC-XZ600P
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When the auto gain control (AGC) is set to “OFF”
When the motion sensor option (MOTION) is set to “ON”
When the [SENSE UP] setting is made while “AUTO” is selected for [IRIS]
When “MANU” is selected for [IRIS] and the electronic iris (EI) option is set to “ON”
When the motion sensor option (MOTION) is set to “ON” (The fast shutter speed (SHORT) can be set.)
1. The [SENSE UP] setting cannot be made while “AUTO” is selected for [IRIS].
In the following conditions, the [SENSE UP] option is fixed to “OFF” and the level of electronic
sensitivity cannot be configured.
1
2
2. The “SHORT” and “LONG” options cannot be selected for the [SHUTTER] setting.
In the following conditions, the [SHUTTER] option is fixed to “OFF” and the electronic shutter setting
cannot be made.
1
2
3
85 / 100

Related product manuals