31
3. Pressing the Shutter button down halfway
automatically focuses and adjusts the exposure, and
pressing the Shutter button down fully captures the
images.
When the shake warning icon
appears, hold the
camera steadily, with your arms at your side or use a
tripod to stabilize the camera to prevent blurred images.
Press the shutter button
halfway
Using the Stabilizer
The Stabilizer function works according to the luminance of the target object. This function uses
special image data processing for getting high sensitivity of CCD. High sensitivity can use higher
shutter speed compared with normal mode, so it reduces influence of hand shaking. Press the
stabilizer button before pressing the shutter button.
Stabilizer button
To activate Stabilizer
• Press the Stabilizer button on top of your camera to
enable/disable stabilizer.
If Stabilizer is enabled, the stabilizer icon is displayed on the LCD
monitor and the ISO setting is automatically set to Auto. See
"Setting ISO" on page 52 for more details.
Stabilizer on
To Next Page
Loading...
