To Next PageTo Next PageWhat to do if the 'Battery depleted' message appears on my Sanyo VPC-E10?
If your Sanyo Digital Camera displays a 'Battery depleted' message, it means the battery pack is consumed and needs to be recharged.
Why my Sanyo Digital Camera has no power?
If your Sanyo Digital Camera has no power, it could be due to several reasons: the battery pack might be dead (recharge it), the battery pack might not be inserted correctly (reinsert it correctly), or the battery/card compartment cover is not completely closed (close it completely).
How to fix a too dark image on my Sanyo Digital Camera?
If your Sanyo Digital Camera image is too dark, and the subject was lit from behind, use the forced flash mode. Also, you can use the exposure correction function or adjust the ISO sensitivity setting if there is not enough light.
Why doesn't the flash operate on my Sanyo VPC-E10 Digital Camera?
If the flash on your Sanyo Digital Camera isn't working, it might be because the flash off mode is selected (set the flash to automatic or forced flash mode) or the battery pack is dead (recharge the battery pack).
Why don't the operation buttons work on my Sanyo VPC-E10 Digital Camera?
If your Sanyo Digital Camera operation buttons (arrow buttons, MENU button, etc.) aren't working, it might be because your finger is touching the shutter button, activating the focus lock. Remove your finger from the shutter button, and then try using the operation buttons.
Why are the colors of my Sanyo Digital Camera images captured indoors not correct?
If images captured indoors with your Sanyo Digital Camera have incorrect colors, it could be due to the ambient lighting (use the forced flash mode) or an incorrect white balance setting (set the white balance setting correctly).
Why is a part of the image missing in my Sanyo VPC-E10 photos?
If a part of the image from your Sanyo Digital Camera is missing, it's possible that the hand strap or a finger was blocking the lens. Hold the camera correctly, ensuring the lens is not obstructed.
What to do if the zoom stops momentarily on my Sanyo VPC-E10 Digital Camera?
When zooming in or out with your Sanyo Digital Camera, if the zoom movement stops momentarily, it's likely that the optical zoom has reached its maximum magnification. Release the zoom switch and press it again.
Why can't I edit or rotate an image on my Sanyo Digital Camera?
If you cannot edit or rotate an image on your Sanyo Digital Camera, the protect mode might be set. Cancel the protect mode to enable editing and rotation.
How to delete a protected image on my Sanyo VPC-E10?
If the “Image is protected” message appears on your Sanyo Digital Camera and you can't delete the data, it means you're trying to delete data that's protected from accidental erasure. To delete the image, cancel the protect mode first.
General| Camera type | Compact |
|---|---|
| Image Sensor | 1/2.5-inch CCD |
| Sensor Type | CCD |
| Effective Pixels | 10.0 MP |
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| Video Resolution | 640 x 480 |
| Supported Flash Memory | SD, SDHC |
| Shutter Speed | 1/2 - 1/2000 sec |
| Video Resolution (fps) | 30 fps |
| LCD Screen Size | 2.7 inches |
| Storage | SD/SDHC memory card |
| Battery Type | Lithium ion |
| ISO Sensitivity | Auto, 100, 200, 400 |
| Storage Media | SD card |
