To Next Page
D
Danielle BoydSep 12, 2025
Why does no playback image appear on my Sanyo VPC-E10?
- TtcarterSep 12, 2025
If no playback image appears on your Sanyo Digital Camera, ensure that the playback mode is active by pressing the playback button [=].
Why does no playback image appear on my Sanyo VPC-E10?
If no playback image appears on your Sanyo Digital Camera, ensure that the playback mode is active by pressing the playback button [=].
Why does my Sanyo Digital Camera video flicker under fluorescent lights?
If you notice a flicker in the image when recording a video clip under fluorescent lights with your Sanyo Digital Camera, it's due to the shutter speed being too fast. Set the ISO sensitivity to w or less.
Why is the recording capacity less than indicated on my Sanyo VPC-E10 Digital Camera?
If the recording capacity of your Sanyo Digital Camera is less than indicated, it could be because the recording capacity is less than the value specified for the card. Depending on the card, the capacity may be less than the specified value. Please refer to the instructions that accompanied the card.
General| Camera type | Compact |
|---|---|
| Image Sensor | 1/2.5-inch CCD |
| Sensor Type | CCD |
| Effective Pixels | 10.0 MP |
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| Video Resolution | 640 x 480 |
| Supported Flash Memory | SD, SDHC |
| Shutter Speed | 1/2 - 1/2000 sec |
| Video Resolution (fps) | 30 fps |
| LCD Screen Size | 2.7 inches |
| Storage | SD/SDHC memory card |
| Battery Type | Lithium ion |
| ISO Sensitivity | Auto, 100, 200, 400 |
| Storage Media | SD card |
