89 English
CONTRAST CORRECTION
Add contrast (light and dark) to an image to make it clearer.
1 Display the image to be modified, and display the Playback Menu
(page 82).
2 Select “CONTRAST CORRECT”,
and press the SET button.
h The Contrast Correction Screen
appears.
YES:
Proceed with the contrast
correction.
EXIT:
Return to the Playback Menu.
3 Select “YES”, and press the SET button.
h Image processing begins.
h During image processing, “Processing” is shown on the screen.
h In some cases, it may take several seconds to process the image.
h When processing is completed, the modified image is shown. Check
the image to see if the post-processing result is satisfactory.
EXIT
YES
OK
OK
Autocorrect the contrast?
Autocorrect the contrast?
Autocorrect the contrast?
To Next Page
Loading...
