Name: Sanyo VPC-E10
Brand: Sanyo
Rating: 4 (1 reviews)

To Next Page

To Previous Page

69 English

TOUCH SENSOR (TOUCH FOCUS) SETTING

The touch sensor function, by which the autofocus is activated by a finger-

touch on the shutter button, can be set to ON or OFF. When the touch sensor

function is set to OFF, the autofocus is activated when you press the shutter

button halfway; then gently press the shutter button to snap the picture.

1 Display the Recording Menu (page 66).

2 Select “TOUCH SENSOR” and press the SET button.

h The sensor menu appears.

3 Select the desired icon, and press the SET button.

h The selected touch sensor function is set.

CAUTION

i When the camera is attached to a tripod, the touch sensor sensibility may

be diminished. This happens because the touch sensor works by detecting

changes in the capacitance when the camera is touched with bare hands.

The touch sensor sensibility will also be diminished, for example, if you

hold the camera with gloved hands.

i When the camera is used near inverter-type fluorescent lights, the touch

sensor sensitivity may be diminished.

#: The touch sensor function is set to ON.

$: The touch sensor function is set to OFF.

Other manuals for Sanyo VPC-E10

Questions and Answers:

Need help?

Do you have a question about the Sanyo VPC-E10 and is the answer not in the manual?

General