EN-56
3. If you select [Select] in the previous step, the figure shown on the
right hand side will appear.
J Select the image that you want to print with the W / X buttons.
J Select the [Print Num] (up to 99) with the S / T buttons.
J After selecting the desired image and printing number, press
the SET button to confirm.
4. Select [Exit] with the
S / T buttons, and press the SET button.
5. Select [Print] with the
S / T buttons, and press the SET button to
start printing.
6. The printing starts and the figure shown on the right hand side
appears.
J The [COMPLETE] will be displayed temporarily, reminding you
that the printing procedure is finished.
J If a print error is detected, the [PRINT ERROR] will be displayed.
Select
SET:Enter105-0003
SET:Enter
Images
SET:Enter
PictBridge
To Next Page
Loading...
