EN-29
Setting the Flash
Set the flash for capturing images. The flash firing mode can be set to suit for the photographic conditions.
1. Slide the mode switch to [
].
2. Toggle the
button to select the desired flash mode.
Flash mode Description
[ Blank ] Auto Flash The flash fires automatically to suit the photographic conditions.
[
] Red-eye Reduction Use this mode to reduce the red-eye phenomenon when you want
to capture natural-looking images of people and animals in low-light
conditions.
When capturing images, the red-eye phenomenon can be reduced
by asking the subject (person) to look at the camera or get as close
to the camera as possible.
[
] Forced Flash In this mode, the flash always fires. Use this mode for photographing
under artificial light such as backlighting.
[
] Flash Off Use this mode when capturing images using indoor lighting, for
stages and indoor competitions, and when the subject is too far
away for the flash to be effective.
The available flash settings in different photography modes:
To Next Page
Loading...
