SANYU SY2000 Series User Manual

- 14 -
6 Parameter summary and instructions
Parameter Description
○ —Parameters that can be modified in any state
× —Parameters that cannot be modified in running state
◆—Actual detection parameters, which cannot be modified
◇ —Manufacturer parameters, which are limited to manufacturer modification, and users are prohibited
Group F0-basic operating parameters
Code
Item
Description
Setting range
Default
Value
Amend
ment
F0.00
Power
Display current power
0.10～
99.99KW
Model
setting
◆
F0.01
Main controller
software
version
Display the current software version
number
1.00～99.99
1.00
◆
F0.02
Running
command
channel
selection
0： Panel command channel
1： Terminal command channel
2 Communication command channel
0～2
0
○
F0.03
Frequency
setting
selection
0： Panel potentiometer
1：Digital setting 1, panel ▲, ▼ key
adjustment
2：Digital setting 2, terminal UP /
DOWN adjustment
3：AVI analog setting (0 ～ 10V)
4：Combination setting
5：ACI setting (0 ～ 20mA)
6：Communication setting
7：Pulse setting
Note: When combination setting
chosen, the combination setting is
selected in F1.15.
0～7
0
○
F0.04
Maximum
output
frequency
The maximum output frequency is the
highest frequency that the inverter is
allowed to output, and it is the
benchmark for acceleration and
deceleration settings.
MAX｛50.0,
【F0.05】｝～
999.9Hz
50.0H
z
×
F0.05
Upper limit
frequency
The operating frequency cannot exceed
this frequency
MAX{0.1，
【F0.06】}～
【F0.04】
50.0H
z
×
F0.06
Lower limit
frequency
The operating frequency cannot be
lower than this frequency
0.0～Upper
limit
0.0Hz
×

SANYU SY2000 Series Specifications

General

Cooling Method	Forced Air Cooling
Communication Interface	RS485
Ambient Temperature	-10°C to +40°C
Control Method	PWM
Protection	Overvoltage
Protection Features	Overload
Relative Humidity	<90% (no condensation)
Altitude	<1000m