Need help?Do you have a question about the SANYU SY5000-1R5G-4 and is the answer not in the manual?
General| Power | 1.5 kW |
|---|---|
| Output Power | 1.5 kW |
| Efficiency | ≥90% |
| Cooling Method | Forced Air Cooling |
| Frequency | 50Hz/60Hz |
| Protection Features | Overload, Overvoltage, Undervoltage, Overheat, Short circuit |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% to 95% (Non-condensing) |
| Storage Temperature | -20°C to 65°C |
General safety warnings and precautions for installation and operation.
Explanation of the VFD model designation and nameplate information.
Table detailing different VFD models based on voltage and power ratings.
Specifications and technical data for the VFD, including voltage, frequency, and control modes.
Environmental conditions required for VFD installation and operation.
Diagram and explanation of essential wiring for VFD operation.
Identification and description of buttons on the VFD operation panel.
How to display and cycle through monitoring parameters on the keypad.
How the VFD displays and indicates malfunction or alarm states.
Detailed explanation and examples of setting function codes for parameter configuration.
Table detailing function codes, their descriptions, and parameters.
Detailed explanations of specific function codes and their operational parameters.
Explanation of the Modbus RTU communication mode and data frame format.
Table of supported Modbus function codes and register addresses for VFD control.
List of fault codes, displayed codes, and corresponding fault information for troubleshooting.
Mapping of function codes to their communication addresses for VFD parameter access.
General information on VFD faults, protection status, and troubleshooting procedures.
Common abnormal VFD phenomena, their possible causes, and recommended solutions.
Regular checks and inspections to ensure proper VFD operation and identify potential issues.
Recommended maintenance schedule and replacement intervals for VFD components.
To Next Page
