Need help?Do you have a question about the Saramonic Blink100 B2 and is the answer not in the manual?
General| Battery Life | Up to 10 hours |
|---|---|
| Microphone Type | Omnidirectional |
| Output | 3.5mm TRS |
| Number of Transmitters | 2 |
| RF Frequency Band | 2.4GHz |
| Sampling Rate | 48kHz |
| Bit Depth | 24-bit |
| Modulation | GFSK |
| Antenna | Internal |
| Headphone Output | No |
| Housing | Plastic |
| Channels | 2 |
| Transmission Type | 2.4GHz |
| Operating Range | 100m (328ft) line of sight |
| Type | Wireless microphone system |
| Latency | Less than 6ms |
| Receiver Type | Dual-channel |
| Power Source | Built-in lithium battery |
| Operating Temperature | -10°C to 50°C |
Introduces the Blink100 wireless transmitter and its visual layout. Details components like buttons and indicators.
Details the LED status indicators for the transmitter, covering power, pairing, mute, and battery levels.
Explains the operation of the transmitter's power, mute, gain, and noise cancellation buttons.
Covers the USB-C charging port, belt clip, and built-in microphone of the transmitter.
Introduces the Blink100 wireless receiver and its visual layout. Details components like ports and indicators.
Details the LED status indicators for the receiver, covering power, pairing, and battery levels.
Explains the receiver's power button, LINE OUT jack, USB-C charging port, and belt clip.
To Next Page
