What to do if warning indicator for too little water lights up on my saro EB 26?
If the warning indicator lights up, it means the water supply is disturbed, the valve is damaged, or the water pressure is too low. You should check the water supply, check the valve and replace it if necessary. Ensure the water pressure is at least 1 kg/cm2.
Why is my Saro Ice Maker making strong noises?
Strong noises from your Saro Ice Maker can occur if the unit isn't properly leveled, is touching the wall or other objects, or if something on the unit is loose. To resolve this, ensure the unit has a safe, straight stance and remove any objects it's touching.
General| Ice shapes | Bullet ice |
|---|---|
| Control type | Buttons |
| Product type | Built-in/freestanding ice cube maker |
| On/off switch | Yes |
| Built-in display | No |
| Housing material | Stainless steel |
| Freezing capacity | 26 kg/24h |
| Ice storage capacity | 6 kg |
| Refrigerating medium | R600a |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 528 mm |
|---|---|
| Width | 420 mm |
| Height | 655 mm |
| Weight | 36500 g |
To Next Page
