What to do if warning indicator for too little water lights up on my saro EB 26?
If the warning indicator lights up, it means the water supply is disturbed, the valve is damaged, or the water pressure is too low. You should check the water supply, check the valve and replace it if necessary. Ensure the water pressure is at least 1 kg/cm2.
Why is my Saro Ice Maker making strong noises?
Strong noises from your Saro Ice Maker can occur if the unit isn't properly leveled, is touching the wall or other objects, or if something on the unit is loose. To resolve this, ensure the unit has a safe, straight stance and remove any objects it's touching.
What to do if my saro EB 26 compressor is working, but no ice cubes are produced?
If the compressor works but no ice cubes are produced, it may be due to a leak in the cooling system or a dusty condenser. Have the cooling system checked by a specialist. Remove the dust and clean the ventilation slots.
How to fix my saro EB 26 if it does not work?
If your Saro Ice Maker isn't working, switch the unit off, wait 5 minutes, and then switch it on again. Put the unit back into operation when the ambient temperature is higher.
Why Saro Ice Maker cooling performance is unsatisfactory?
If your Saro Ice Maker's cooling performance is unsatisfactory, check for direct sunlight, nearby heat sources, poor ventilation, proper closure of the flap, deformation or damage to the damper bar, and cleanliness of the condenser.
What to do if the warning lamp for too little water lights up on my saro EB 26?
If the warning lamp for too little water lights up on your Saro Ice Maker, it could be due to a disturbed water intake. Check the water intake to ensure it's functioning correctly. Another possibility is a damaged valve, which may need to be checked and exchanged if necessary. Also, ensure that the water pressure is at least 1 kg/cm2.
Why do the ice cubes always stick together in my saro EB 26?
If the ice cubes from your Saro Ice Maker always stick together, it indicates that the storage tank is not sufficiently cooled. Try emptying the tank more often and do not leave the ice cubes overnight in the storage tank. Also, control the temperature.
What to do if the condenser works but no ice cubes are produced by my saro EB 26?
If the condenser works on your Saro Ice Maker, but no ice cubes are being produced, it could be due to a leak in the cooling system. In this case, have the cooling system checked by a specialist. Another possible cause is a dusty condenser. Clean the condenser and ventilation slots to ensure proper functioning.
Why don't the ice cubes fall properly into the container of my saro EB 26 Ice Maker?
If the ice cubes do not fall at all or only partially into the container of your Saro Ice Maker, it may be because the ambient or water temperature is too low. The ambient temperature has to be at least 10°C and the water temperature at least 7°C. Alternatively, the valve might be damaged, requiring replacement.
Lists items included with the professional ice cube maker.
States compliance with current EU standards and directives.
Highlights the importance of reading and observing safety instructions for user safety.
Defines warning symbols indicating potential dangers for safe operation.
Warns about risks of physical injury from moving parts or improper handling.
Alerts to hazards associated with electrical components, connections, and maintenance.
Advises on risks from packaging materials posing suffocation hazards to children.
Details requirements for unit placement, ventilation, and clearance for optimal performance.
Specifies electrical connection requirements, voltage checks, and grounding.
General| Ice shapes | Bullet ice |
|---|---|
| Control type | Buttons |
| Product type | Built-in/freestanding ice cube maker |
| On/off switch | Yes |
| Built-in display | No |
| Housing material | Stainless steel |
| Freezing capacity | 26 kg/24h |
| Ice storage capacity | 6 kg |
| Refrigerating medium | R600a |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 528 mm |
|---|---|
| Width | 420 mm |
| Height | 655 mm |
| Weight | 36500 g |
To Next Page
