Need help?Do you have a question about the Sartorius Arium Comfort I H2O-I-2-B and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | Arium Comfort I H2O-I-2-B |
| Feed Water | Potable tap water |
| Bacteria | < 1 CFU/mL |
| Display | Touchscreen |
| Application | Laboratory applications |
| Resistivity | 18.2 MΩ·cm |
| Particles | < 1/ml |
| Purification Technology | Reverse osmosis |
| Output Water Quality | Ultrapure water (Type 1) |
| Flow Rate | Up to 2 liters per minute |
Defines the system's purpose and guidelines for proper operation and maintenance.
Provides essential safety and site requirements for installing the Arium® Comfort system.
Outlines the initial steps for powering on and checking the Arium® Comfort system.
Provides instructions for installing pre-treatment cartridges and other purification components.
Covers manual, volume-controlled, and time-controlled dispensing methods.
Details the two-stage process for cleaning the water purification system.
Guides on replacing the plastic bag in the Arium® Bagtank.
Instructions for replacing the pre-treatment filter cartridge.
Details the process for replacing the reverse osmosis modules.
Instructions for replacing the softener cartridge (Comfort II version).
Provides instructions for safely replacing the UV lamp in applicable systems.
Guides on removing and installing new cartridges into the system.
Details the procedure for changing the final sterile or ultra filter.
Provides instructions for safely replacing defective fuses in the device.
Lists and explains warning indicators, their causes, and display messages.
Lists and explains error codes, their causes, and system responses.
To Next Page
