Need help?Do you have a question about the Sartorius arium pro and is the answer not in the manual?
General| Type | Ultrapure Water System |
|---|---|
| Model | arium pro |
| Brand | Sartorius |
| Flow Rate | Up to 2 L/min |
| TOC | < 5 ppb |
| Display | Touchscreen |
| Connectivity | USB, Ethernet |
| Power Supply | 100-240 V, 50/60 Hz |
| Water Quality | Ultrapure Water |
| Filtration Technology | Reverse Osmosis, Ultrafiltration |
| Resistivity | 18.2 MΩ·cm |
| Bacteria | < 0.1 CFU/mL |
| Particle Size | 0.2 µm |
| Feed Water Requirements | Potable Water |
| Operating Humidity | 20-80% (non-condensing) |
Identifies hazards with high probability of severe injury or death if not avoided.
Explains symbols used in the instructions for clarity and understanding.
Emphasizes careful reading of instructions before operating the system.
Provides contact information for application advice and technical support.
Warns about electrical hazards and requirements for safe connection.
Warns about fire/explosion risks with flammable materials.
Advises on protecting eyes and skin from sanitizing agents.
Details precautions to prevent damage to system components.
Defines the proper use and limitations of the arium® pro system.
Identifies key components of the arium® pro system's front panel.
Describes the system's purpose and multi-stage purification methods.
Illustrates the water purification process flow within the system.
Identifies the electrical connection ports on the right side of the unit.
Explains communication capabilities with an arium advance system.
Details the connection for the feed water supply inlet.
Lists all accessories and equipment included in the system packaging.
Highlights electrical and fire/explosion hazards during bench mounting.
Provides instructions for placing the system on a flat surface.
Describes the process and requirements for mounting the system on a wall.
Details the assembly of wall brackets and their load-bearing capacity.
Warns about ensuring adequate support and fastener capacity for wall mounting.
Explains the information displayed in the header and working environment.
Describes the purpose and information shown in the footer display.
Details the keys and slider available for operation.
Explains how to activate and exit the system's Eco mode.
Describes how to activate and deactivate the key locking feature.
Guides on using keys for menu navigation.
Illustrates key functions and menu level indicators.
Explains the process for entering numerical data.
Describes the function to return to the operating mode.
Highlights critical voltage and connection conditions for startup.
Guides through connecting power and starting the system.
Explains the steps to select the desired display language.
Details how to configure the date and time settings.
Explains how to set the units for displayed measurements.
Provides instructions for installing purification cartridges.
Step-by-step guide for installing the red-labeled cartridge.
Step-by-step guide for installing the blue-labeled cartridge.
Outlines the procedure for connecting tubing and initiating system rinsing.
Guides on attaching the sterile final filter assembly.
Details the process for rinsing the final filter after installation.
Describes the operating state and recommends Eco mode for quality.
Explains the methods for dispensing water.
Lists key aspects to consider before and after dispensing.
Details how to use the slider to regulate water flow.
Guides on initiating and managing time-controlled dispensing.
Shows the range of adjustable dispensing times.
Explains how to connect and use the sampling tubing.
Notes the process for rinsing the final filter when using sampling tubing.
Illustrates the hierarchical structure of the system menu options.
Explains the functions for saving and printing system data.
Details how to choose specific parameters for data output.
Describes the procedure for a single-item data printout.
Explains how to configure the interval for automatic data saving.
Details the function to save data when water is dispensed.
Guides on setting display units for conductivity and temperature.
Lists available units for displaying conductivity.
Explains how to select temperature units and display options.
Guides on setting minimum requirements for ultrapure water quality.
Explains how to activate and set the Eco mode.
Instructions on how to exit the system's Eco mode.
Details the process for configuring date and time settings.
Explains how to choose the language for the system display.
Guides on activating or deactivating acoustic signals.
Explains how to modify the display's contrast and brightness.
Details how to enable PIN protection for menu access.
Guides on resetting the system to its factory default configuration.
Explains how to access and view device-specific information.
Guides on displaying current conductivity and temperature readings.
Explains how to view the remaining service life of components.
Provides details on how to access service contact information.
Explains how to view current and past warning messages.
Introduces the process for replacing the system's cartridges.
Guides on starting the cartridge replacement function.
Details steps for disconnecting tubing and directing it.
Guides on initiating the system depressurization routine.
Refers to detailed instructions for replacing cartridges.
Step-by-step guide for removing the blue-labeled cartridge.
Step-by-step guide for removing the red-labeled cartridge.
Instructions for unpacking and preparing new cartridges.
Details connecting the adapter and installing the red-labeled cartridge.
Details connecting the adapter and installing the blue-labeled cartridge.
Guides on reconnecting tubing and starting the rinse cycle.
Outlines the steps for depressurizing the system.
Details collecting water during the depressurization process.
Provides instructions for restarting the system.
Guides on rinsing the system after it has been restarted.
Explains the procedure for replacing the sterile final filter.
Notes monthly replacement and conditions requiring earlier replacement.
Guides on resetting the timer after filter replacement.
Details the process and safety precautions for replacing fuses.
Introduces the section on system alerts and errors.
Explains visual signals and causes of warning messages.
Emphasizes adherence to laws for disposing of contaminated parts.
Clarifies that the system is not for household waste disposal.
Explains EU legislation regarding electrical equipment disposal.
Provides contact information for disposal services in Europe.
Provides specific instructions for disposing of UV lamps.
Explains WEEE directive for business products in the EU.
Advises on disposal procedures outside the EU.
Lists physical dimensions, weight, and clearance requirements.
Specifies quality parameters for feed and product water.
Details flow rates, operating conditions, and power supply.
Lists connection types, fuse details, and installation specifications.
Lists accessories such as final filters and printers.
Details specific cartridge kits for the arium® pro system.
Identifies the manufacturer, device type, and series.
Lists directives and standards the system complies with.
Identifies the person authorized to compile technical documentation.
To Next Page
