Operation
5. Operation
5.1 Operating Mode
Once initial startup is complete, your arium
®
pro system will be in the operating
mode. Ultrapure water can be dispensed.
It is recommended that you do not turn your arium
®
pro system off during normal
operation (e.g., evenings and weekends) to ensure uniformly high ultrapure product
water quality. The Eco mode is available for this.
5.2 Dispensing Ultrapure Water
Water can be dispensed manually, volume-controlled or time-controlled.
When dispensing product water, pay attention to the following aspects:
t Prior to dispensing the water, remove the protective cap on the bell assembly of
the final filter.
t After dispensing the water, replace the protective cap back on the bell assembly.
Before each critical application, you should first dispense and discard 100 mL of
water (this corresponds to the volume of the supply to the final filter and the final
filter capsule).
15:32 10.04.15
0.055 µS/cm c
Menu Care
To Next Page
Loading...
