Operation
5.2.1 Manual Dispensing
Manual dispensing is performed directly using the dispense slider on the right side of
the display.
With your fingers, you can use the slider to continuously regulate the volume flow
of the product water.
t Place your finger in the recess of the slider and move it downwards to elevate the
volume flow.
t Use your finger to move the slider upwards and lower the volume flow.
t Additionally, you can stop the dispense routine by tapping at the top of the slider
(on the crossed-through drop symbol). Set the flow to the maximum volume by
tapping on the bottom of the slider (on the 3-drop pyramid symbol).
y By touching the slider in the middle, you set the average volume flow.
The volume flow may vary as a function of temperature, age and condition of the
cartridges!
Example:
Manual dispensing with the maximum flow volume.
t Stop dispensing by tapping on the top of the slider (crossed-through drop) or by
pressing the “Dispense” (R) “
Stop
” key.
15:32 10.04.15
0.055 µS/cm c
Stop
To Next Page
Loading...
