Sartorius arium pro - Specific Data Saving Methods; Performing a Single Data Printout; Setting the Data Save Interval; Saving Data Automatically During Dispensing

30
arium
®
pro Operating Manual
System Menu
6.2.2 Single-item Save
To start a Single printout, select under Menu r Save data the item Single printout.
The selected parameters are output. Afterwards, the system switches to the operating
mode.
6.2.3 Save Interval
To access the Print interval, highlight the appropriate checkbox under Menu item
Menu r Save data. In the Menu r Save data r Settings, the interval can be
adjusted within a range of 1 to 60 minutes.
6.2.4 Save When Dispensing
To access the Print when dispensing, highlight the appropriate checkbox under
Menu r Save data. As soon as the arium
®
pro system dispenses ultrapure water,
the data are printed.