EasyManua.ls Logo

Sartorius arium pro - Interfaces and Tubing Connections; arium Exchange Interface Function; Feed Water Tubing Connections

Sartorius arium pro
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
arium
®
pro Operating Manual
Product Description
1.3 arium
®
Exchange Interface
The arium
®
Exchange interface enables communication with an arium
®
advance
system. When such a cable is connected, the arium
®
bagtank (< 2 liters) will stop
dispensing water if the fill level of the arium
®
pro system falls below the minimum.
This is to prevent any malfunction of the arium
®
pro system.
Use the Firewire cable delivered with the arium
®
pro system for device communica-
tion when supplying the arium
®
advance from a bagtank. To guarantee proper
functioning, first switch on the arium
®
advance and then the arium
®
pro system.
A bagtank with an integrated pump must be used when supplying the arium
®
pro
system from a bagtank, otherwise this could lead to malfunctioning. A bagtank 20
can be used without a pump as well, as long as it is positioned at the same height or
higher than the arium
®
pro system.
1.4 Tubing Connections
Tubing connectors, side view right
1. Feed water supply

Other manuals for Sartorius arium pro

Related product manuals