Sartorius arium pro - Save Data Functions; Options for Saving and Printing Data; Parameter Selection for Data Saving

29
arium
®
pro Operating Manual
System Menu
6.2 Save Data
The Save data functions are used for output of current measured values and system
information to a printer. Access the menu item Menu r Save data. Three options
are available for printing and saving: Single printout, Print interval and Print when
dispensing.
Printing can be used at the same time when the options Print interval and Print
dispensing are activated. The checkboxes all show active Save data functions.
Printer
For data printing, a data printer of the type Sartorius YDP30 should be used.
The following symbol appears in the first line of the display whenever printing is
taking place:
− Print symbol:
6.2.1 Parameter Selection
Under Menu item Menu r Save data r Settings select the parameters to be
printed out.
Using the checkbox, the following parameters can be selected and deselected:
− System information
− LFP (conductivity of the ultrapure water)
− Temperature (ultrapure water)
Menu r Save data

Single printout
 Print interval
 Print when dispensing

Settings
▼ Start