Need help?Do you have a question about the Sartorius arium mini plus and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | arium® mini Plus |
| Brand | Sartorius |
| Resistivity | 18.2 MΩ·cm |
| TOC | < 5 ppb |
| Bacteria | < 1 CFU/ml |
| Display | Touchscreen |
| Filtration Technology | Reverse Osmosis, Ion Exchange |
| Feed Water Temperature | 5 - 35 °C |
| Power Supply | 100-240 V AC |
| Particle Size | < 0.2 µm |
Provides essential information for operating the arium® mini device.
Specifies the arium® mini plus and arium® mini models covered by these instructions.
Identifies intended users and their required knowledge and responsibilities.
Explains the meaning of various symbols used throughout the operating instructions.
Defines the device's purpose and limitations for ultrapure water production.
Outlines the necessary knowledge and training for individuals operating the device.
Covers crucial safety precautions for operating the device and preventing hazards.
Details precautions for electrical power connections and potential hazards.
Addresses potential radio interference and measures for residential areas.
Warns about hazards of using non-approved accessories and consumables.
Provides a general introduction to the device's components and layout.
Identifies key components visible on the front of the arium® mini plus and arium® mini.
Details the USB and power connections on the rear of the device.
Explains the inlet, drain, and bag outlet connections on the rear of the device.
Explains the two-stage purification process for arium® mini plus and arium® mini.
Describes the tubing used to supply tap water to the arium® mini plus.
Details various tubing used for water transfer, draining, and dispensing.
Explains the function of the final particulate filter for sterile filtration.
Describes the display information and buttons available during dispensing.
Explains the three types of messages (error, warning, status) and their display.
Describes how messages are displayed and accessed in the dispensing mode.
Details how to view and interpret the list of active messages.
Introduces the main menu structure for device operation and care.
Explains how to use the touch screen to navigate through the device menus.
Describes the keypad used for entering volumes and system settings.
Provides a detailed overview of the device's menu hierarchy and functions.
Lists configurable settings like language, date, and display formats.
Details configurable parameters for device maintenance and reminders.
Provides instructions and warnings for safely moving the device.
Lists all components included with the arium® mini plus and arium® mini systems.
Guides users through the initial unpacking and setup process.
Explains how to correctly connect the device to the power supply.
Outlines the step-by-step wizard for initial startup of the arium® mini plus.
Guides users through setting the date and time formats during startup.
Allows users to configure displayed water quality and temperature units.
Provides instructions for inserting the ultrapure water and pretreatment cartridges.
Details the procedure for correctly installing the water storage bag.
Explains how to connect the various tubing to the device's rear ports.
Details connecting the feed water tubing to the device and tap water supply.
Guides the connection of the drain water tubing to the device and drain.
Explains connecting the tubing for dispensing water from the storage bag.
Describes the process for rinsing the newly installed ultrapure water cartridge.
Details how to attach the final filter to the water outlet.
Explains the procedure for rinsing the newly installed final filter.
Outlines the step-by-step wizard for initial startup of the arium® mini.
Describes how to select the display language during the startup wizard.
Explains how to initiate the device's startup sequence.
Guides users through setting the date and time formats during startup.
Allows users to configure displayed water quality and temperature units.
Provides instructions for inserting the ultrapure water cartridge.
Details the procedure for correctly installing the water storage bag.
Explains how to connect the various tubing to the device's rear ports.
Details connecting the feed water tubing to the device and tap water supply.
Guides the connection of the drain water tubing to the device and drain.
Describes the process for filling the water bag.
Describes the process for rinsing the newly installed ultrapure water cartridge.
Details how to attach the final filter to the water outlet.
Explains the procedure for rinsing the newly installed final filter.
Instructions for powering the device on, off, and standby modes.
Covers the procedures for dispensing ultrapure water from the system.
Step-by-step guide for dispensing water manually.
Instructions for dispensing a specific, pre-set volume of water.
Explains how the system handles dispensing cancellation due to low water.
Describes manual dispensing directly from the storage bag.
Details how to access and navigate the device's main menu.
Specific instructions for manually refilling the bag on arium® mini models.
Instructions for activating and deactivating the device's standby and ECO modes.
Guide to accessing the device's settings menu for configuration.
Procedure to recalibrate the flow rate sensor for accurate volume dispensing.
Instructions for safely cleaning the device's touch screen display.
Steps for cleaning the exterior of the device, including safety precautions.
Outlines recommended intervals for replacing consumables and performing maintenance.
Guide to accessing the device's maintenance and care menu.
How to view upcoming consumable replacement reminders.
General procedure for replacing various consumables.
Detailed steps for replacing the water storage bag.
Instructions for removing and replacing the final filter.
Overview for changing pretreatment and ultrapure water cartridges.
Steps to safely remove installed cartridges from the device.
Instructions for correctly installing new cartridges into the device.
Procedure for rinsing the device after new cartridges are installed.
Specific instructions for replacing the ultrapure water cartridge on arium® mini.
Guide for replacing the UV lamp, including safety warnings.
Step-by-step instructions for removing the old UV lamp.
Instructions for correctly installing the new UV lamp.
How to set up or disable reminders for final filter replacement.
Procedure to safely release pressure from the device before maintenance.
Process for venting the system to remove air from the water circulation.
Guidelines and warnings regarding device repairs and contacting service.
Lists and explains error codes, their causes, and corrections.
Lists and explains warning messages, their causes, and corrections.
Covers other common faults not categorized as errors or warnings.
Guidelines for disposing of the product's packaging materials.
Information regarding potential contamination hazards and disposal responsibilities.
Steps for safely taking the device out of service.
Instructions for proper disposal of the equipment, including WEEE compliance.
Specific guidance for the disposal of used UV lamps.
Information on the free disposal of rechargeable and non-rechargeable batteries.
Details the electrical specifications for the device and its power supply.
Specifies the environmental conditions for operation, storage, and shipping.
Lists safety requirements for electrical equipment according to standards.
Outlines EMC requirements and interference resistance/emission classifications.
Specifies the quality parameters for the ultrapure and pre-stage water.
Lists the quality requirements for incoming feed water.
Provides physical dimensions, weight, and water treatment method of the device.
Lists the order numbers for consumables specific to the arium® mini plus.
Lists the order numbers for consumables specific to the arium® mini.
To Next Page
