Sartorius arium mini plus - Messages in Dispensing Mode

Operating Instructions arium
®
mini plus | arium
®
mini 17
Operating Design
4.3 Messages in Dispensing Mode
If several messages are active in dispensing mode, the message list can be called up
(see Chapter 4.4, page 18). The message list only appears if several messages are
active and at least one message cannot be displayed for conductivity or temperature
of the water. If only one message is active, the message is opened directly instead of
the message list.
Dispensing is not possible when there is an error message. The three buttons for
dispensing can be used, but when you try dispensing, the error message reappears.
Fig. 4-3:
8
3
1
2
0.25
8
0.055 ȝ6FPF
30.1 °C
5l
3l
1l
0HVVDJHV
1
Message display in dispensing mode (example)
No. Symbol Name Description
1
0HVVDJHV
1
0HVVDJHV
2
0HVVDJHV
3
Message list
0HVVDJHV
1
: Indicates that error messages are
stored and opens the message list.
0HVVDJHV
2
: Indicates that warning messages
are stored and opens the message list.
0HVVDJHV
3
: Indicates that status messages are
stored and opens the message list.
2
8
8
Conductivity
or
temperature
message
Displays an error or warning about the water
conductivity or the water temperature.
3
8
8
Message
pertaining to
the filling
level of the
bag
8: Indicates that the bag is empty.
Water dispensing is not possible.
8: Indicates that very little water can
be dispensed.