Sartorius arium mini plus - Rinsing the Final Filter

54 Operating Instructions arium
®
mini plus | arium
®
mini
Startup
Requirements
The filling level is too low for the dispensing volume entered during volume-
controlled dispensing.
y The dialog box “Fill bag?” appears.
Procedure
t Tap the [
YES] button.
y If the bag in the no longer contains a sufficient amount of water or empties
during the rinsing process, the dialog box “Fill bag” appears.
t Change the bag (see Chapter 6.5.8, page 52).
y When filling is complete, the dialog box “Filling finished” appears.
t Verify that the free end of the tank filling tubing is secure. If required:
Remove the tank filling tubing from the “Inlet” connection at the rear of the
device and keep it in a safe place.
t Confirm the bag filling process with the [
OK] button.
y The display changes to the dispensing screen.
6.5.10 Connecting the Final Filter
Procedure
t Attach the bell assembly to the final filter.
t Press the final filter into the quick connector of the water outlet.
t Confirm that the final filter has been connected with the [OK] button.
y The display changes to the dispensing screen.
1
Fill bag?
7KHEDJFRQWDLQVORIZDWHU:RXOG\RX
OLNHWR¿OOLWQRZ"
NO YES
1
Fill bag
0DNHVXUHWKHUHLVVXI¿FLHQWZDWHUWR¿OO
WKHEDJ7DS67$57WR¿OOWKHEDJ
w
1
)LOOLQJ¿QLVKHG
5HPRYHWKHWDQN¿OOLQJWXEH,QOHWRQWKH
UHDURIWKHGHYLFH
OK