Sartorius arium mini plus - Care Menu Parameters; Transport; Transporting the Device

Operating Instructions arium
®
mini plus | arium
®
mini 25
Operating Design
Parameters Setting values Explanation
Key beeps On Enables | disables short beeps when you
touch a button.
Off*
Alarm beep On* Enables | disables the sustained beep when
a warning message occurs until the warning
message has been confirmed.
Off
Error beep On* Enables | disables the sustained beep when an
error message occurs until the error message
has been confirmed. Does not disable the
error tone in the case of a leak.
Off
Confirmation
beep
On* Enables | disables the beep at the end of
longer time sequences, e.g. after volume-
controlled dispensing or after filling the bag.Off
Display
brightness
Bright* Sets the display brightness to 100%.
Dark Sets the display brightness to 60%.
Volume adjustment See Chapter 7.3.4, page 47.
Settings
Reset
Yes, reset Restores all system settings to default,
e.g. the ultrapure water limit value and the
displayed values. Does not reset the dates
for the reminders to change consumables.
No Cancels the settings reset.
* Basic settings
4.10 Parameters of the “Care” Menu
Parameters Setting values Explanation
Reminder Active* Enables | disables the reminder to change the
final filter (see Chapter 8.7, page 58).
Inactive
Depressurization See Chapter 8.8, page 79.
Ventilation See Chapter 8.9, page 80.
* Basic settings