System Menu
Exiting Eco Mode
Exit the Eco mode by pressing the Eco/Home key. The system switches back to
operating mode.
The automatic ECO mode is factory-set to 10 minutes and | or pre-set to 30 minutes
with a connected TOC monitor.
6.3.4 Date | Time
Under Menu r Settings r Date | Time, you can configure the settings for date and
time. In the first step, enter the desired format; in the second, the date and the time.
6.3.5 Language
Under Menu r Settings r Language, select the language to display texts. You can
choose between the following languages:
− English
− German
− French
− Italian
− Spanish
− Russian
− Japanese
− Chinese
− Portuguese
− Polish
6.3.6 Acoustic Signals
Under Menu r Settings r Acoustic Signals, acoustic signals can be activated and |
or deactivated. The following signals are available:
− Warning alarm:
Continuous signal sounds until the triggered warning is confirmed by user.
− Error alarm:
Continuous signal sounds until the triggered error is confirmed by user.
− Confirmation beep:
Longer signal, occurs at the end of time sequences (time- and volume-controlled
dispensing, rinsing).
− Key beeps:
Short signal when tapping a key.
r r Date/Time
DD.MM.YY 24 h
MM/DD/YY AM/PM
Back
r r Language
English
German
French
Italian
r r Acoustic signals
Warning alarm
Error alarm
Confirmation beep
Key beeps
To Next Page
Loading...
