Unpacking and Installation
Back panel of the arium
®
pro system unit’s wall mounting bracket and wall rail on
models used as wall-mounted systems.
The assembly of the two wall brackets and wall rail, (included in delivery), is suitable
for a load of 100 kg (220 lbs) and is only intended for the arium
®
pro system
(including water).
Do not put any additional load on the arium
®
pro system.
When mounting the unit on a wall, make sure that the mounting surface and
fasteners selected are capable of supporting a minimum of 100 kg (220 lbs).
Inadequate support and | or fasteners may result in injury to the operator and
damage to the equipment.
When selecting a place of installation for your arium
®
system, you must ensure that a
feed water supply, a 100–240 V electric socket and an atmospherically vented drain
are available.
− Use the pre-drilled slotted holes in the wall rail to mount it onto the wall.
− Fasten the wall rail to the wall using suitable screws and dowels (ensure that it is
horizontally aligned).
− Mount the arium
®
pro system by hooking it into the wall mounting bracket.
To Next Page
Loading...
