Operating Concept
Your arium
®
pro system also features an automatic ECO mode. This automatic ECO
mode is activated by default and returns the system to the Eco mode after the Eco
time has elapsed. The Eco time starts after the last entry into the system. It can be
configured in the System menu (see Chapter “6.3.3 ECO Mode”, page 32).
Key Locking Function
The arium
®
pro system has a key locking function. When the key locking function is
active, it is not possible to dispense water.
All other functions (measurement, expiry of ECO time, print interval and error and
warning messages) continue to run in the background. When the automatic ECO
time has elapsed, the device enters ECO mode and automatically removes the key
lock so that the device is once again ready for operation upon leaving ECO mode. If a
warning or an error appears while the key lock is activated, the device will likewise
automatically cancel the key lock and display the corresponding message.
To activate the key lock, simultaneously press the Eco/Home key and the “Dispense”
key (R). Use the same key combination to deactivate the key locking function.
To Next Page
Loading...
