12
Activating the Service Mode
Turn on the Combics
The weighing instrument is currently in an application mode (such as Weighing or,
as in this example, Counting).
Enter the service password (see Appendix) and press M to confirm.
Note:
The number shown in the illustration on the left is not the service password.
The device in now is Service mode. On the right-hand side of the Setup menu
header line,
an
S S
S S
S is displayed.
In the Service mode, the Setup menu contains additional menu items that are not
available in the user Setup mode; for example, the highest menu level now
includes the option
Factory settings: all parametersFactory settings: all parameters
Factory settings: all parametersFactory settings: all parameters
Factory settings: all parameters.
To view or change device parameters in Setup mode:
Select
Device parametersDevice parameters
Device parametersDevice parameters
Device parameters
SuS001_d.bmp
SuS002_d.bmp
SuS003_d.bmp
To Next Page
Loading...
Need help?
General
