Preparation
Set parameters for the “Weighing in Percent”
program:
$ Select the application program in the
operating menu
§ Set the following parameters:
2 Application programs
2 1 Program selection
2 1 5 Weighing in percent
3 Application parameters
3 5 Storage parameter
3 5 1 ο With stability
(internal resolution)
3 5 2 With higher stability
3 6 Decimal places
3 6 1 none
3 6 2 ο 1 decimal place
3 6 3 2 decimal places
3 6 4 3 decimal places
ο = Factory setting
43
Printout: Weighing in Percent
pRef + 100 % : Reference percentage
Wxx% + 111.6 g : Reference weight net xx%
Prc + 94.7 % : Calculated reference percentage
To Next Page
Loading...