Need help?Do you have a question about the Sartorius CP2201 and is the answer not in the manual?
General| Maximum Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Weight | 2.5 kg |
| Repeatability (Std. Dev.) | 0.01 g |
| Linearity | ±0.02 g |
| Stabilization Time (typical) | 2 s |
| Repeatability | 0.01 g |
| Interface | RS-232 |
| Power Supply | AC adapter |
| Operating Temperature | 10 °C to 40 °C |
Steps for correctly positioning and securing the draft shield chamber components.
Specific instructions for connecting the electronics box to the CP225D model.
Guidance on placing and securing draft shields with a 3-sided design.
Specific setup steps for the CP622 model, including pan placement.
Steps for setting up rectangular pans for scales with capacities up to 10 kg.
Steps for setting up rectangular pans for scales with capacities over 10 kg.
Specific instructions for connecting the CP225D to AC power.
Steps for connecting scales up to 10 kg to AC power.
Instructions for connecting scales with capacities over 10 kg to AC power.
Instructions for safely connecting external devices like printers or PCs.
Steps for leveling scales up to 10 kg using front feet adjustment.
Steps for leveling scales with capacities over 10 kg.
Describes the balance/scale's display and key operating elements.
Step-by-step guide for internal calibration on applicable models.
Step-by-step guide for external calibration.
Explains the Net-Total program for weighing multiple components and summing them.
Details the Counting program for determining part count based on reference sample quantity.
Guides on using a reference balance/scale for accurate counting of large parts.
Explains the Weighing in Percent program for proportional weight readings.
Covers the program for calculating average weights from multiple measurements, suitable for unstable samples.
Explains the program to switch between two different weight units for display.
Detailed technical specifications for various models in the Competence/CP Series.
To Next Page