13
Leveling Balances/Scales with a Weighing
Capacity of up to 10 kg
Only the 2 front feet are used for leveling.
§ Retract the 2 rear feet (on models with
rectangular weighing pans only).
§ Turn the 2 front feet as shown in the
diagram until the air bubble is centered
within the circle of the level indicator.
> In most cases this will require several
adjustment steps
§ For weighing heavy samples:
Extend the 2 rear feet until they touch the
surface on which the balance/scale rests
(on models with rectangular weighing
pans only).
Leveling Balances/Scales with a Weighing
Capacity over 10 kg
§ Adjust the leveling feet until the air bubble
is centered within the circle of the
level indicator
Antitheft Locking Device on Balances/
Scales with a Weighing Capacity of up
to 10 kg
To fasten an antitheft locking device,
use the lug located on the rear panel of the
balance/scale.
● Secure the balance/scale at the place of
installation, e.g., with a chain or a lock.
To Next Page
Loading...