Need help?Do you have a question about the Sartorius CP124S and is the answer not in the manual?
General| Maximum Capacity | 120 g |
|---|---|
| Readability | 0.1 mg |
| Display | LCD |
| Repeatability | 0.1 mg |
| Linearity | ± 0.2 mg |
| Power Supply | AC adapter |
| Interface | RS232 |
| Operating Temperature | 10 °C to 30 °C |
Instructions for setting up the analytical draft shield chamber.
Steps to connect the electronics box to the balance.
Instructions for setting up the 3-sided draft shield.
Component placement for CP622 models.
Component placement for rectangular pans up to 10 kg.
Component placement for rectangular pans over 10 kg.
Procedure for connecting power to CP225D models.
Procedure for connecting power to balances up to 10 kg.
Safety guidelines when connecting to AC power.
Required time for the balance to reach optimal operating temperature.
Instructions on how to level the balance for accurate results.
Specific leveling procedure for balances up to 10 kg.
Specific leveling procedure for balances over 10 kg.
Explanation of the balance display and its operating controls.
Example of adapting the balance to unstable ambient conditions using menu code 114.
Configuration of menu codes for ISO/GLP compliance.
Details on interface type, modes, rates, parity, and handshake.
Detailed pinout for the RS-232 interface connector.
Common causes for displayed error codes.
Recommended solutions for resolving error codes.
Instructions for cleaning the balance and its components.
Summary of technical specifications for the Competence Series/CP Series.
To Next Page
