Need help?Do you have a question about the Sartorius CPA2P and is the answer not in the manual?
General| Max Capacity | 2.1 g |
|---|---|
| Readability | 0.001 mg |
| Repeatability | ±0.001 mg |
| Calibration | External |
| Display | LCD |
| Pan Size | 1.18 in |
| Interface | RS-232 |
| Power Supply | 50/60 Hz |
| Operating Temperature | +10 to +30 °C |
Read instructions, avoid hazardous areas, authorized service, disconnect power, comply with regulations, cleaning safety.
Check voltage, caution with RS-232 cables, use Sartorius accessories, operator responsibility for modifications.
Choose location, avoid influences; acclimate to room temperature for 2 hours.
Use original Sartorius equipment, AC adapter IP20, avoid unauthorized modifications.
Adjust front feet, retract rear feet, center air bubble.
Adjust leveling feet until the air bubble is centered.
Explanation of symbols, keys, and display indicators on the balance.
Steady hand, forceps, test measurements for temperature adjustment.
Port on bottom, not for legal metrology, open cover plate.
Calibration determines difference; Adjustment corrects it.
Conditions for calibration/adjustment; error messages.
Menu code 1 9 3, motorized weight, activate calibration.
Configure calibration followed by adjustment, or end sequence.
Menu code 1 15 3, temperature range, adjustment prompt.
Hierarchical view of all configurable parameters and their settings.
Step-by-step guide to setting parameters using menu codes.
Configure environment parameters for ISO/GLP records, set date/time.
Step-by-step example for setting time, date, and display brightness.
F key to start/toggle, CF key to end application programs.
Use F key for determination, change quantity via F key.
Optimize accuracy via automatic updating, can be activated/deactivated.
Determine weights of unstable samples by averaging multiple operations.
Connect computer/device via port; type, mode, rates, parity, format, handshake.
Check pin assignments against chart to avoid damage.
Detailed pin assignments for the interface connector.
Lists common display errors, causes, and solutions.
Detailed technical data for various Sartorius balance models.
Sartorius AG declares equipment complies with European Directives.
Valid for non-automatic weighing instruments for legal metrology.
Details of EC type-approval certificate, validity, and model information.
To Next Page