Need help?Do you have a question about the Sartorius CPA 34000 and is the answer not in the manual?
Guidance on choosing a suitable location and conditioning the balance.
Identification and function of display indicators and control keys on the balance.
Procedures for external calibration for accuracy class II balances.
Detailed breakdown of available parameter settings and their factory defaults.
Program to weigh components into a defined total weight.
Program to determine part count based on reference sample weight.
Program to obtain weight readouts in proportion to a reference weight.
Program for determining weights of unstable samples by averaging operations.
Steps to set up the interface port for computer connection, including pin assignments.
Instructions for cleaning the balance housing, pan, and draft shield safely.
To Next Page
General