Need help?Do you have a question about the Sartorius CPA 12001S and is the answer not in the manual?
Introduction to specific balance series and models covered.
Lists balance types: Micro-, Analytical, Precision, Precious Metal.
General safety guidelines for balance use.
Safety aspects related to balance installation.
Lists components for CPA2P and CPA2P-F models.
Lists components for different CPA/GCA models.
Guidelines for storing and shipping the balance.
Procedures for unpacking and acclimating the balance.
Advice on choosing a suitable installation location.
Explanation of the seal on verified balances.
Steps for installing CPA2P and CPA2P-F models.
Instructions for installing analytical draft shields.
Component placement for triangular weighing pans.
Component placement for round weighing pans.
Connecting specific models to electronics box.
Installation steps for a 3-sided draft shield.
Component placement for pans up to 10 kg.
Component placement for pans over 10 kg.
Connecting AC adapters for different models.
Information on country-specific power cords.
Connecting AC adapter for heavier capacity balances.
Safety precautions for AC adapters.
Regulatory compliance details regarding FCC rules.
Connecting external devices like printers or PCs.
Required time for balance warmup.
Instructions for using the antitheft device.
Explains the purpose of leveling the balance.
Steps for leveling balances up to 10 kg.
Steps for leveling balances over 10 kg.
Overview of the balance display and controls.
Lists and describes numbered display positions.
Explains the basic weighing function's use and features.
Compliance for legal metrology use.
Specific guidance for microbalance models.
Initial setup steps for the balance.
How to tare the balance.
Specifics for filter weighing on CPA2P-F.
Instructions for analytical/precision balances.
Instructions for microbalance CPA2P.
Step-by-step guide for simple weighing.
Explains calibration/adjustment purpose and features.
Calibration requirements for legal metrology use.
External calibration for accuracy class II.
Steps for internal calibration.
Configuring the calibration/adjustment sequence.
Details on the automatic calibration function.
Temperature restrictions for verified balances.
Step-by-step for internal calibration.
Step-by-step for external calibration.
How to open and navigate the setup menu.
Procedure to print current menu settings.
Example of configuring settings using menu codes.
Overview of menu structure and levels.
Overview of menu items and default settings.
Menu structure for weighing parameters.
Menu structure for application programs.
Menu structure for application parameters.
Menu structure for data interface settings.
Menu structure for print settings.
Menu structure for application printouts.
Menu structure for extra functions and reset.
Configuring measurement parameters and display.
Describes key operations for configuration.
Step-by-step for setting time and date.
Steps to adjust the display brightness.
Explains function keys for application programs.
Application programs for legal metrology.
Identifies the menu code and display symbol.
Explains and details the net-total formulation program.
Steps to set parameters for net-total formulation.
Example printout format.
Configuration for counting example.
Step-by-step guide for counting.
Continues step-by-step guide for counting.
Identifies the menu code for counting.
Explains and details the counting program.
Explains function keys for counting.
Automatic updating for counting accuracy.
Using a reference balance for counting.
Steps to set parameters for counting.
Example printout for counting.
Configuration for counting example.
Step-by-step guide for counting parts.
Identifies menu code for weighing in percent.
Explains and details weighing in percent program.
Explains function keys for weighing in percent.
Steps to set parameters for weighing in percent.
Example printout for weighing in percent.
Configuration for residual weight example.
Step-by-step guide for residual weight.
Identifies menu code for animal weighing.
Explains and details animal weighing program.
Explains function keys for animal weighing.
Steps to set parameters for animal weighing.
Example printout for animal weighing.
Configuration for animal weighing example.
Step-by-step guide for animal weighing.
Menu code and setup for unit toggling.
How to toggle between weight units.
Types of printouts and line formats.
Procedures for generating ISO/GLP records.
Examples of printouts without ID codes.
Examples of printouts with ID codes.
Outputting initialization values.
Automatic weight readout printing.
Parameters included in ISO/GLP printouts.
Menu codes for ISO/GLP printouts.
Example lines in ISO/GLP printouts.
Example for calibration printouts.
Explains the balance interface port and its capabilities.
Default interface port settings.
Identifying non-verified digits on printouts.
Describes 16-character data output format.
Lists special and error codes for data output.
Describes 22-character data output format.
How non-verified digits are identified.
Lists special codes and their meanings.
Lists error codes and status indicators.
Formats for sending commands.
Meaning of command characters.
Synchronization of data communication.
Balance interface handshake parameters.
Software handshake control.
Data output via print command.
Automatic data output modes.
Information on faster output speeds.
Details of the female interface connector.
Details of the male connector.
Detailed pin assignments for RS-232 interface.
Diagram illustrating cable connections.
Common error codes and their resolutions.
Specific troubleshooting for certain models.
Troubleshooting unstable weight readouts.
Troubleshooting incorrect weight readouts.
Steps to prepare CPA2P for transport.
Steps to prepare CPA2P-F for transport.
Guidelines for service, repairs, and general cleaning.
Specific cleaning for stainless steel parts.
Instructions for cleaning specific parts.
Procedures for performing safety inspections.
Guidelines for disposal and repairs.
Warning about disposing of equipment with household waste.
Technical details for CPA2P and CPA2P-F models.
Technical details for CPA26P to CPA64 models.
Technical details for GCA models.
Technical details for CPA1003S/P to CPA223S models.
Technical details for CPA6202S/P to CPA2202S.
Technical details for CPA10001 to CPA2201 models.
Technical details for CPA26P to CPA64 models.
Technical details for CPA1003S-OCE to CPA423S-OCE.
Technical details for CPA323S-0CE to GC803S-OCE.
Technical details for CPA6202S/P to CPA2202S.
Technical details for CPA10001-0CE to CPA2201-0CE.
Technical details for CPA34001S/P to CPA34000.
Information on printer and remote display accessories.
Details on rechargeable battery packs and cases.
Software, kits, and adapter accessories.
Draft shield covers, cables, hangers, dust covers.
Regulations for legal metrology.
Refers to EC Type-Approval Certificate.
Sartorius compliance with EU directives.
Services for new installations and EC verification.
Official EC declaration document.
Details of type approval for weighing instruments.
Statement of compliance with standards.
Holder of the approval and its legal basis.
Approved instrument types and models.
Markings for specific balance types.
Markings for external electronics and back view.
Explains the meaning of markings like K, M, S, MD, T.
Example of model designation plate.
Example of verified instrument plate.
To Next Page
General
