Need help?Do you have a question about the Sartorius CPA2202S-0CE and is the answer not in the manual?
General| Maximum Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Linearity | ±0.02 g |
| Stabilization time (typical) | 2 seconds |
| Calibration | External |
| Power Supply | AC Adapter or Battery |
| Repeatability (Standard deviation) | 0.01 g |
| Interface | RS-232 |
| Operating Temperature | +10 °C to +40 °C |
Step-by-step guide for performing balance and scale operational checks.
Steps to activate Binary Processor Interface mode for service software interaction.
Procedures for adjusting the zero point offset using voltmeter or software.
Methods for adapting the A/D converter via voltmeter or service software.
Method for measuring and calculating the repeatability of the weighing system.
Filing procedures to correct off-center loading errors in strain gauge systems.
Performing external span calibration for various models.
Steps for external linearity checking and adjustment.
Process for checking and adjusting the linearity of the balance.
Lists error codes, their explanations, and suggested solutions for troubleshooting.
To Next Page