Need help?Do you have a question about the Sartorius CPA225D-OCE and is the answer not in the manual?
General| Maximum Capacity | 220 g |
|---|---|
| Pan Size | Ø 80 mm |
| Weighing Technology | Monolithic weighing cell |
| Display | LCD |
| Calibration | External |
| Linearity | ±0.2 mg |
| Interface | RS-232 |
| Operating Temperature | +10°C to +30°C |
| Relative Humidity | 80 % |
General guidance for safe balance operation and handling.
Safety advice related to balance installation and power connection.
Guidelines for protecting the balance during transport and storage.
Procedures for safely removing the balance and checking for damage.
Advice on choosing a suitable environment and acclimatizing the balance.
Details about the EU seal on verified balances for legal metrology.
Steps for assembling balance components like draft shields and pans.
Procedures for installing draft shields on analytical balances.
Instructions for setting up triangular and round weighing pans.
Connecting external electronics and installing draft shields.
Procedures for installing rectangular weighing pans on balances.
Steps for connecting the balance to AC power safely.
Safety precautions and types of AC adapters used.
Details on FCC regulations regarding interference for the equipment.
Connecting external devices and required balance warm-up times.
Instructions for securing the balance using an antitheft device.
Adjusting feet for level placement on balances up to 10 kg capacity.
Adjusting feet for level placement on balances over 10 kg capacity.
How to perform fundamental weighing operations.
Instructions for weighing samples suspended below the balance.
Steps for calibrating and adjusting the balance for accuracy.
Guide to adjusting balance settings using menu codes.
Comprehensive list and explanation of configurable parameters.
Customizing measurement identification, date, time, and screen brightness.
Procedure for determining the number of parts based on weight.
Calculating weight readouts as a percentage of a reference weight.
Determining weights of unstable samples by averaging measurements.
Options for generating printouts automatically or manually, including line format.
Demonstrations of printout formats with and without data ID codes.
Requirements and parameters for ISO/GLP compliant records.
Details on the serial interface, modes, rates, parity, handshake, and synchronization.
Specifications for data transmission formats, commands, and control.
Pinout details for the interface connector.
Common error codes and their corresponding troubleshooting steps.
Diagnosing and resolving problems with weight display fluctuations or errors.
Instructions for safely packing the CPA2P balance for transport.
Information on service contracts, authorized repairs, and battery caution.
Guidelines for cleaning the balance and its surfaces.
Specific instructions for cleaning internal parts and checking safety.
Guidelines for environmentally friendly disposal and repair of equipment.
Technical data for CPA2P and CPA2P-F balance models.
Technical data for CPA26P, CPA225D, CPA324S, CPA224S, CPA124S, CPA64 models.
Technical data for GCA1603P, GCA803S, GCA2502 models.
Technical data for CPA1003S, CPA1003P, CPA623S, CPA423S, CPA323S, CPA223S models.
Technical data for CPA6202S, CPA6202P, GPA5202, CPA4202S, CPA3202S, CPA2202S models.
Technical data for CPA10001, CPA8201, CPA5201, CPA34001S, CPA34001P, CPA16001S, CPA12001S, CPA34000 models.
Technical data for CPA26P-OCE, CPA225D-OCE, CPA324S-OCE, CPA224S-OCE/PCE, CPA124S-OCE/PCE, CPA64-OCE models.
Technical data for CPA1003S-OCE, CPA623S-OCE, CPA523S-PCE, CPA423S-OCE models.
Technical data for CPA323S-OCE, CPA223S-OCE, GC1603S-OCE, GC803S-OCE models.
Technical data for CPA6202S-OCE, CPA6202P-OCE, GPA5202-OCE, CPA4202S-OCE/PCE, CPA3202S-OCE/PCE, GPA3202-OCE, CPA2202S-OCE models.
Technical data for CPA10001-OCE, CPA8201-OCE, CPA5201-OCE, CPA2201-OCE models.
Technical data for CPA34001S-OCE, CPA34001P-OCE, CPA16001S-OCE, CPA12001S-OCE, CPA34000-OCE models.
Accessories for data logging and remote viewing.
External battery options for portable operation.
Protective cases for transporting balances.
Software for data transfer and related cables.
Density determination kits, antistatic pans, and calibration weights.
Optional draft shield chambers for specific models.
Accessories for draft shields and PC connectivity.
Remote switches, foot switches, and T-connectors.
Accessories for weighing, and protective dust covers.
Information on EU directives and type conformity for legal metrology.
Details on Sartorius's EC verification services for instruments.
Information on maintaining verification validity within European countries.
Official declaration of compliance with European directives.
Official certificate details for weighing instruments in legal metrology.
Explanation of CE mark, metrology stickers, and model designation plates.
Examples of balance identification and verified status plates.
To Next Page