52
Factory Settings
Resolution: Standard (3 2 1)
Number of subweighs for averaging: 10 (3 3 2)
Preparation
Select the “Averaging” application in the
operating menu:
$ Turn off the scale: Press e
● Turn on the scale: Press e; while all segments
are lit, press the ) key briefly
● Select the “Averaging” menu item:
Press the ) p p keys, ) repeatedly
if needed, until
2 1 12 Averaging is displayed
● Confirm selection:
Press and hold the p key
> o indicates the selected item
● To select averaging parameters:
Press p
● Select and confirm:
– Number of subweighing operations
for averaging:
3 3 1 5 subweighs
3 3 2 10 subweighs
3 3 3 20 subweighs
3 3 4 50 subweighs
3 3 5 100 subweighs
See also the “Scale Operating Menu (Overview)”
in the chapter entitled “Configuring the Scale”
● Save settings and exit the operating menu:
Press and hold the ) key
To Next Page