To Next PageTo Next Page
Need help?Do you have a question about the Sartorius ED4202S and is the answer not in the manual?
General| Capacity | 4200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Repeatability (Std. Dev.) | 0.01 g |
| Linearity | ±0.02 g |
| Stabilization Time (typical) | 1.5 s |
| Operating Temperature | 10 °C to 40 °C |
| Calibration | External |
| Power Supply | AC adapter |
| Weighing Units | g, kg, lb, oz |
| Interface | RS-232 |
General safety instructions to prevent damage and ensure correct usage of the balance/scale.
Instructions for safe installation, including power supply and connecting cables.
Instructions for leveling the balance/scale to ensure accurate measurements.
Detailed explanation of the balance/scale's display and operating elements.
Explains the basic weighing function, including taring and printing weights.
Conditions for calibration and how external calibration is blocked by a seal.
Explains the function of each key when navigating and configuring the balance/scale settings.
Explains the Counting program for determining the number of parts with approximately equal weight.
How to activate and change the reference percentage for the Weighing in Percent application.
Instructions on how to set the factor or divisor for the Calculation application.
How to change the number of subweighing operations for the Animal Weighing program.
Instructions for operating with an ISO/GLP printer and configuring printout settings.
