To Next PageTo Next Page
Need help?Do you have a question about the Sartorius ED822 and is the answer not in the manual?
Safety guidelines for equipment operation and handling to prevent damage and hazards.
Step-by-step guide for assembling the balance/scale components.
Instructions for connecting the balance/scale to the power supply.
Step-by-step guide for performing a simple weighing operation.
Procedures for calibrating and adjusting the balance/scale for accuracy.
Program for determining the number of parts based on weight.
Program for obtaining weight readouts as a percentage of a reference weight.
Program for calculating weight using a multiplier or divisor (e.g., weight per area).
Program for determining average weights of unstable samples.
Table listing error codes, their causes, and recommended solutions.
Safety guidelines for equipment operation and handling to prevent damage and hazards.
Step-by-step guide for assembling the balance/scale components.
Instructions for connecting the balance/scale to the power supply.
Step-by-step guide for performing a simple weighing operation.
Procedures for calibrating and adjusting the balance/scale for accuracy.
Program for determining the number of parts based on weight.
Program for obtaining weight readouts as a percentage of a reference weight.
Program for calculating weight using a multiplier or divisor (e.g., weight per area).
Program for determining average weights of unstable samples.
Table listing error codes, their causes, and recommended solutions.
General| Maximum Capacity | 820 g |
|---|---|
| Readability | 0.01 g |
| Calibration | External |
| Display | LCD |
| Linearity | ±0.02 g |
| Pan Size | 120 mm diameter |
| Repeatability (Std. Dev.) | 0.01 g |
| Stabilization Time (typical) | 2 seconds |
| Interface | RS232 |
