To Next PageTo Next Page
Need help?Do you have a question about the Sartorius ED423S and is the answer not in the manual?
General| Maximum Capacity | 420 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | 310 x 310 mm |
| Calibration | Internal/External |
| Display | LCD |
| Dimensions | 400 x 400 x 140 mm |
| Power Supply | AC Adapter |
| Stabilization time (typical) | 2 seconds |
| Interface | RS-232 |
| Operating Temperature | 10°C to 30°C |
| Repeatability | ≤ ±0.001 g |
| Linearity | ±0.002 g |
General safety advice for operating the balance/scale to prevent damage.
Requirements and precautions for installing the balance/scale safely.
Step-by-step guide to assemble and set up the balance/scale components.
Explains the purpose of leveling the balance/scale for accurate measurements.
Describes the feature for weighing items below the balance/scale.
Identifies and explains the buttons and display indicators on the balance/scale.
Steps needed before performing basic weighing.
Defines calibration and adjustment and their importance for accuracy.
Lists conditions and requirements for calibration/adjustment.
Explains internal calibration for verified instruments.
Describes the automatic process of internal calibration.
Details parameters for external calibration.
Explains the role of each key during menu configuration.
Demonstrates how to navigate menus to change the language setting.
Main configuration areas: scale, interface, and printing.
Settings for Weigh Unit, Counting, and Percent Weighing.
Settings for Net-total, Totalizing, and Animal Weighing programs.
Settings for Calculation and Density Determination programs.
Details the Counting application program.
Explains the Weighing in Percent application.
Explains the Calculation application for weight per unit area or gsm.
Explains the Animal Weighing application for unstable samples.
Explains the Net-total formulation application.
Explains the Totalizing application for summing values.
Explains changing weight values to different units.
Explains density determination using the buoyancy method.
Explains the function of the balance/scale's interface port.
Detailed list of pin assignments for the interface connector.
Lists display errors, causes, and solutions.
Troubleshooting for overload errors.
Troubleshooting for low load or ERR 54 errors.
Troubleshooting for application-related errors.
Troubleshooting for calibration parameter errors.
Troubleshooting for unstable weight readouts.
Troubleshooting for incorrect weight readouts.
Technical specifications of the balance/scale models.
Detailed specifications for different balance/scale models.
