17
Output
The scale is equipped with a data interface port,
which you can use to connect
– a printer,
– a computer/PC, or
– a universal remote control switch
through a Zener barrier.
Printer
You can configure the print functions to meet your
individual requirements by selecting the
corresponding menu codes.
You can have printouts generated automatically,
or by pressing p; dependent on or independent
of the stability parameter, and with or without
data ID codes.
See the chapter entitled “Data Output Functions” for
a detailed description of data output options.
Interface Port
Instead of a printer, you may choose to connect a
different peripheral device, such as a computer (PC).
You can control the functions of your Economy scale
using an on-line PC.
Request messages are sent via the interface to
activate scale functions. Some of the functions
generate response messages.
See the chapter entitled “Data Output Functions” for
a detailed description of data output options.
To Next Page
Loading...
Need help?
General