29
Example
Calibrate the scale
Configuration: Factory settings
Step Key (or instruction) Display/Output
1. Turn on the scale e 0.000 kg
2. Zero the scale, if necessary ( 0.000 kg
3. Begin calibration ) + 5.000
Calibration weight is dis- > 2 seconds
played without weight unit
4. Place the indicated calibration 5.000
weight on the scale
(in this case, 5000 g)
After calibration, the calibration + 5.000 kg
weight is displayed
with weight unit
5. Remove the calibration weight 0.000 kg
To Next Page
Loading...
Need help?
General